Select Category
OTHERS
Electric motors -Three-phase and three-phase brake motors
They are the most effective and economical solution for transmissions requirements in alternating current. The three-phase motors are available as per IEC international standards from size 063 to 280 in versions with B5 and B14 flanges and B3 feet. They are available with single polarity (2, 4, 6; IE2 efficiency from size 080, IE3 from size 132) and with alternating or direct current brake and a power range from 0.09 kW to 90 kW.
Certifications Available for TS/TH: ATEX 3GD - UL/CSA/EAC
Certifications Available for TBS/TBH: UL/CSA/EAC
Fiber optics
di-soric fiber optics are used wherever space limitations or the ambient conditions do not permit the use of conventional optical devices, or such devices can only be used with limitations.di-soric fiber optics are used wherever space limitations or the ambient conditions do not permit the use of conventional optical devices, or such devices can only be used with limitations.
Fork Light Barriers
di-soric fork light barriers are working on the principle of through beam sensors.Transmitter, receiver and all the electronics are in one metal casing ensuring a very simple and quick installation. Complex brackets for fastening the transmitter and receiver as well as time-consuming adjustment are unnecessary. di-soric fork light barriers have a sturdy metal casing.All devices with clocked infrared or red light have a high immunity against ambient light.
Thanks to the high switching frequency, the short response time and the high resolution even very small parts can be very precisely positioned and very fast movements reliably detected.
Proximity Switches - Inductive , Capacitive
di-soric proximity switches are available in a multiplicity of different designs and for most different applications.From the standard application to highest technical requirements, di-soric proximity switches perform all tasks perfectly. A complete product program, always on the state of the newest technology and convincing by its impressing quality and reliability.
Screw Jacks - Ball Screw Actuators - 1/2 to 50 ton
Duff-Norton Ball Screw actuators provide high efficiency and high speed in one linear positioning package. These actuators come in many standard models, or can be custom designed for any application up to 50 tons. For select 75 Ton or 100 Ton applications
The positive action of the low friction ball screw and nut design provides longer life at load and requires less power to achieve a specified thrust. Ball screw actuators can be used individually,in tandem or as part of a larger mechanical system. With lifts up to 20 feet, Duff-Norton Ball Screw actuators offer the perfect solution to many linear positioning applications
Screw Jacks - Machine Screw Actuators - 1/4 ton to 350 ton
Precise Positioning - can be controlled accurately for positioning within thousandths of one inch
Self Locking - models featuring higher gear ratios are inherently load holding as long as the actuator is not subject to vibration
Uniform Lifting Speeds - since many actuators feature the same gear ratios different capacities can be used in the same application to lift unevenly distributed loads with uniform speeds
Quick, Sure Operation - All actuators are designed and built to be positive acting, for accurate response to motive power
Ultrasonic Sensors
di-soric ultrasonic sensors are used in automationing tasks for distance measurement and as proximity switches. They work on the principle of sound time measurement which ensures a reliable detection irrespective of colour or surface finish.Even transparent objects, liquids and powders are reliably detected. di-soric ultrasonic sensors are insensitive to dirt and can be applied on long distances. UItrasonic proximity switches, ultrasonic forks and ultrasonic though beam sensors without any blind zone round off the present range.
Worm gear reducers
NMRV and NMRV POWER worm gear reducers currently represent the most advanced solution to market requirements in terms of efficiency and flexibility. The new NMRV Power series, also available as compact integral helical/worm option, has been designed with a view to modularity: low number of basic models can be applied to a wide range of power ratings guaranteeing top performance and reduction ratios from 5 to 1000.
Certifications Available: ATEX 2GD/3GD
- NMRV – Sizes: 025-030-040-050-130-150
- NMRVpower – Sizes: 063-075-090-110
- Available versions: fitted for motor coupling, with input shaft, with torque limiter
- Power up to 18,5 kW
- Cases up to 110 in die-cast aluminium alloy and over 130 in G200 grey cast iron
- Ratios between 5 and 100
- Max torque 1.550 Nm and admissible radial loads max 18.000 N ...etc
Servo Dynamics Sdn Bhd
No. 17, Solok Kekabu 1,
Permatang Damar Laut,
11960 Bayan Lepas,
Penang, Malaysia.
www.servo.com.my
Co. Reg. No. 200701009051 (767053A)