Select Category
LINEAR & RING TRACK SYSTEM
DTS+ Track System
The DTS+ is suitable for applications with high loads, a vertical orientation, or where the free space inside the track circuit is required to integrate additional equipment.
The DTS+ system incorporates key features of Hepco’s PRT track system and original DTS, combining them with a high load capacity connection for carriages to the drive belt. The carriages will not disengage from the belt, allowing transmission of higher driving forces compared to the original DTS system. Whilst the original DTS will often be the right choice for many applications, the DTS+ is suitable for applications with high loads, a vertical orientation, or where the free space inside the track circuit is required to integrate additional equipment.
- High strength belt connections allow applications with high speed or high load to be accommodated
- Specially-designed belt-fixing mechanisms connect carriages to the drive belt and do not disengage
- Benefits from low maintenance V guide technology
- Wide choice of system sizes Including 25-351, 44-468, 44-612 and 76-799
- Tracks can incorporate multi carriages that can be locked at workstations for accurate assembly or positioning operations
- Easily incorporated into a multi-function machine as a transfer or positioning system
- Track slides and end segments are fitted to bespoke aluminium sections, the whole assembly can be mounted to your own installation.
DTS2 High Speed Driven Track System
The DTS2 Driven Track System has been developed for high-speed and dynamic applications.
The DTS2 High Speed Track System has been developed for high-speed applications. The use of a scroll drive allows rapid indexing to be achieved with superior positional accuracy without the risk of carriage disengagement. The track system is available with three sizes of slide section (25mm, 44mm and 76mm).
- DTS2 linked carriages can accept high driving forces.
- Consistent speed of carriages all around the track enables smooth continuous motion to be achieved.
- Higher accelerations can be achieved leading to faster cycle times.
- Available in stainless steel.
- The DTS2 track is configurable in to any shape made from straight and curved sections.
GFX HEPCO GUIDANCE SYSTEM FOR BECKHOFF XTS
GFX 1-Trak Lite System Composition
GFX 1-Trak Lite is a spacer slide version of Hepco’s 1-Trak guidance system, including a patented curved track form, providing the optimum mover path for 180° motor modules. The track system is mounted on an aluminium baseplate along with a set of motor support brackets, or can be supplied as a kit of parts for custom installation. Its length is only limited by the number of motors and movers supported by a Beckhoff control system. Please see page 7 for information on these limitations
Features and Benefits
- Hardened V guidance maintains accuracy over long periods
- Low maintenance bleed lubrication system
- All systems available in stainless steel
- Available with food compatible grease
- High rigidity
- Removable track section for easy maintenance
GV3 – V Linear Guide System
GV3 V Linear Guide is a superior V-based linear motion range designed to serve a diverse range of automation & linear applications.
HDS2 Heavy Duty Linear Guide
The ultimate Heavy Duty solution with a wide range of V bearings and linear guides to handle the heaviest loads.
Heavy Duty Linear Guide, the ultimate Heavy Duty solution with a wide range of V bearings and linear guides to handle the heaviest loads.
- Stainless steel linear guides and bearings available as standard.
- Can be configured for gantry systems (XYZ, XY or XZ).
- Two grades of precision linear guides available to suit your budget.
- Unique self-cleaning action expels dirt and debris in hostile environments.
- Available as assembled systems (reducing design and setting time) or in component form.
- System can run dry without lubrication if required.
- Spur or helical rack and pinion drive option available.
- Rack driven carriages incorporate automatic lubrication for pinion.
PRT2 Precision Track Systems
PRT2 precision track systems are the ultimate product for combined circular and linear motion. Hepco’s Track Systems are available in oval, rectangular, and “S” bend configurations with multi carriages allowing different assembly operations as part of one continuous system. All elements of the range are available in stainless steel, allowing for extensive use in the food, medical and scientific industries. Hepco’s track systems are a cost effective alternative to conveyer systems.
SL2 – Stainless Steel Linear Guide
SL2 stainless steel linear guide is the ideal linear motion system for any application requiring corrosion resistance.
Typical industries include nuclear, food, medical and scientific applications where long service life with virtually zero maintenance is essential.
- Stainless steel slides with precision ground finish provides corrosion and wear resistance.
- Low friction and smooth movement.
- Will perform in the most hostile conditions.
- Can operate with or without lubrication.
- Range of greases available for specific applications (food, nuclear, high temperature, low temperature and vacuum environments).
- Miniature solutions for when space is at a premium.
- Performs well in wash down applications.
Servo Dynamics Sdn Bhd
No. 17, Solok Kekabu 1,
Permatang Damar Laut,
11960 Bayan Lepas,
Penang, Malaysia.
www.servo.com.my
Co. Reg. No. 200701009051 (767053A)